STD-502 ultra-thin anti-rust oil

Product Description

STD-502 has excellent protective performance for various metal parts, molds, etc. The oil film is ultra-thin, easy to clean, easy to use, and the parts have beautiful appearance after sealing. It is suitable for the protective treatment of export parts and molds and the long-term sealing and rust prevention of high-end mechanical parts. It is especially suitable for marine transportation and has no odor. The sealing and rust prevention period is more than 12 months. At the same time, we have added STD vapor corrosion inhibitor. When STD molecules evaporate into a confined space, they will form a protective barrier on the metal surface, thereby better protecting the metal.

Main advantages

1. This product has extremely low viscosity and does not affect the appearance of the product after construction;

2. Leave an ultra-thin non-drying film with strong anti-rust performance on the metal surface, which can effectively resist chemical erosion by air, water and other liquid and solid particulate matter. Good permeability enables it to penetrate into the narrow gaps that are difficult for general rust preventive agents to reach, making it truly foolproof;

3. Low cost: Due to the extremely thin oil film and small amount of use, 50-60 square meters can be coated per kilogram, and the unit cost is low;

4. Easy to remove: The oil film formed on the metal surface can be easily removed with petroleum solvents or aqueous cleaning agents;

5. Low cost per unit area, easy to operate, spray, paint, brush, and immerse.

Main technical data

(The above values ​​are representative values, not oil product specification values)

Packaging and storage

20L/200L barrels are sealed and stored in a cool, dry, clean, and ventilated warehouse at room temperature.

Usage and method

1. The metal must be cleaned before oiling, and there must be no pollution and moisture on the surface;

2. It can be used by dipping, spraying, coating, etc. The metal surface must be oiled, and complex-shaped workpieces should be immersed as much as possible;

Declaration: The products displayed on this website are intended exclusively for industrial applications or scientific research. They are not intended for medical, pharmaceutical, or food use. In accordance with applicable laws and regulations, purchasing organizations must hold valid qualifications and approvals.